firebase-messaging 25.1.x, that replaces the legacy FCM registration token with a Firebase Installation ID.
It is controlled by a manifest setting named firebase_messaging_installation_id_enabled. This is a Firebase setting, not a OneSignal setting. OneSignal reads it to decide how to register for push, but does not define it, cannot change it, and cannot apply it to only OneSignal.
Should you enable it?
FID registration is optional but recommended. Google has deprecated FCM registration tokens in favor of Firebase Installation IDs, so every app will need to move eventually. Switching keeps your existing users subscribed and receiving messages, and OneSignal keeps sending through your FCM Service Account. Each device will replace the legacy FCM registration token with the new push token value (FID) on its next launch.Before you turn it on
Review these before you enable FID registration:- Older devices. FID registration requires Google Play services
261200000or later. Devices that are already subscribed keep their current push token. New installs on older Android devices, or on devices that don’t receive Google Play services updates, can’t receive push until Google Play services updates. They show notification_type status-34. - Other push SDKs. The setting applies to your whole app and disables
getToken()anddeleteToken()for every SDK. This mostly affects other SDKs that send push notifications. Check that each one supports Firebase Installation IDs. - Push token format.
OneSignal.User.pushSubscription.tokenandIPushSubscriptionObserverreturn a Firebase Installation ID instead of an FCM registration token. The property type does not change, so nothing fails at compile time. Any code that stores, validates, or sends that value as an FCM token breaks without an error. - Custom Firebase integrations. If your app has its own
FirebaseMessagingService, Firebase callsonRegistered()instead ofonNewToken(). Move your token handling toonRegistered(). If your app callsdeleteToken()(on logout, for example), switch tounregister(). OneSignal does not need either callback. See Firebase’s registration via Firebase Installation ID guide, and Firebase Messaging SDK conflict for running it alongside OneSignal. - Build requirements. Your app must declare
firebase-messaging25.1.2 or later and useminSdk23 or higher. Onfirebase-messaging26.x, your app needsminSdk24 or higher and Kotlin 2.0.0 or later. See Requirements. - Rollback needs a new release. The setting is part of your app build. Turning it on or off requires a new app build and store release. There is no server-side switch.
Is it enabled in your app?
Check the merged manifest, not just your ownAndroidManifest.xml. A dependency can add this setting without it appearing in your source.
1
Build the merged manifest
2
Search the merged output
android:value. FID registration is enabled only when that value is boolean true.No meta-data entry, or a merged value of false, means you are on the legacy token path. To force the value to false when a dependency sets it to true, see Disable FID registration.FirebaseApp was found, and whether register() is available. A successful registration does not log those three, so verbose logging will not show them on a healthy device. Use the merged manifest to confirm the setting.
Known SDKs that enable this setting. Braze Android SDK 43.0.0 and later add
firebase_messaging_installation_id_enabled="true" through manifest merging. If your app includes Braze 43+, FID registration is enabled whether or not you added the setting yourself.Enable FID registration
To enable FID registration, give your app its own Firebase configuration, requirefirebase-messaging 25.1.2 or later, and turn on the manifest setting. Then confirm that devices register with a Firebase Installation ID.
Requirements
FID registration requires all of the following. If any is missing, registration fails with one of the statuses in Troubleshooting.- OneSignal Android SDK
5.11.0or later, or a wrapper SDK version that includes it. See Minimum OneSignal SDK versions com.google.firebase:firebase-messaging25.1.2or later, declared by your app. Earlier 25.1.x versions have registration bugs, including failures after a backup restore or when app data is cloned- Android API 23+ (
firebase-messaging25.0.0 raised the minimum from 21 to 23). Onfirebase-messaging26.x, API 24+ and Kotlin 2.0.0 or later. See Using firebase-messaging 26.x - Google Play services version
261200000or later on the device - A default
FirebaseAppfor your own Firebase project. See Step 1: Add google-services.json to your app - Matching Firebase projects. The project in your
google-services.jsonmust be the same project as the FCM Service Account uploaded to OneSignal. See Match your Firebase projects
Minimum OneSignal SDK versions
FID registration support shipped in OneSignal Android SDK5.11.0. Each wrapper SDK below is the first version that includes it. Older versions only use the legacy token path, so with the setting on, push registration fails on those versions.
Step 1: Add google-services.json to your app
FID registration needs your Firebase project details client side. Downloadgoogle-services.json from the same Firebase project as the FCM Service Account uploaded to OneSignal. If the projects don’t match, registration fails with -6. Add the file to your app, and apply the Google Services Gradle plugin. Where the file goes depends on your app. See Add your Firebase configuration file for steps. You may already have this.
Step 2: Declare firebase-messaging 25.1.2 or later
OneSignal compiles againstfirebase-messaging 24.x, which uses FirebaseMessaging.getToken() for legacy FCM registration tokens.
FID registration uses FirebaseMessaging.register(), which needs firebase-messaging 25.1.2 or later.
To upgrade firebase-messaging, add this to your app module’s Gradle file:
Using firebase-messaging 26.x
The[25.1.2, 25.99.99] range keeps your app on 25.x, which has no extra requirements. If your app or another dependency brings in firebase-messaging 26.x, Gradle resolves to 26.x, and your app also needs:
minSdk24 or higher- Kotlin 2.0.0 or later
Step 3: Add the Firebase manifest setting
Add this inside the<application> tag of your AndroidManifest.xml:
AndroidManifest.xml
enableFirebaseInstallationId: true in the onesignal-expo-plugin config (version 2.8.0 or later) instead, then run expo prebuild.
Step 4: Verify FID registration
Build and run on a device, then check the Push Token in the log or in Dashboard > Audience > Subscriptions.Your OneSignal Subscription should be Subscribed and the push token should be a short Firebase Installation ID like
cXp9fY-TRFCLSy9kVTqorZ, not a longer legacy FCM token containing a colon like dN8Ya5MTR2OO-0BXdqimCI:APA91bFw.... If the status is negative, see Troubleshooting.Disable FID registration
Which approach you need depends on where the setting comes from.- You added it
- A dependency added it
Remove the
<meta-data> element from your AndroidManifest.xml, then rebuild.Troubleshooting
Find the Subscription in Dashboard > Audience > Subscriptions and check its status. Each status below has one cause and one fix. After you correct the configuration and release a new build, the same Subscription recovers on a later session. No reinstall, and no new Subscription is created.-32: No default Firebase app
FID registration requires your app’s own defaultFirebaseApp. OneSignal’s shared Firebase project cannot produce an installation ID.
Most common causes, in order:
google-services.jsonis missing. Download it from your Firebase console under Project settings > Your apps, and add it to your app. Native Android apps use theapp/directory. Other platforms use different paths. See Add your Firebase configuration file.- The Google Services Gradle plugin is not applied. The file alone does nothing. The plugin converts it into the resources Firebase reads at runtime. See Add your Firebase configuration file.
- The plugin is applied in the wrong Gradle file. The
applymust be in your app module’sbuild.gradle, not the project-level file. - Programmatic initialization ran too late, or not at all. If you initialize the default app yourself (for example, because you gate Firebase behind user consent), it must complete before OneSignal initializes. See Set up Firebase without google-services.json.
-33: register API unavailable
TheFirebaseMessaging.register() API does not exist in the version of firebase-messaging your app resolved, or it was removed from your release build.
-
Declare
firebase-messaging25.1.2 or later.register()first appeared in 25.1.0, and OneSignal compiles against 24.x, so your app has to bring the newer library. Use 25.1.2 or later rather than 25.1.0 or 25.1.1. See Requirements. -
Check your resolved version. Another dependency may be pinning an older one:
- If this only happens in release builds, R8 removed or renamed the method. Confirm OneSignal’s consumer ProGuard rules are applied and that you have not disabled them.
-34: FID registration failed
This status is retryable. The SDK tries again on a later session.- Google Play services is out of date. FID registration requires version
261200000or later. Below that version, Firebase requests a legacy token instead of registering the installation ID, and that token is never available to your app. The SDK fails rather than reporting a Subscription that cannot receive push. Update Google Play services on the device through the Play Store. - A transient Firebase failure. No action needed. Registration recovers on a later app launch.
-6: Sender ID mismatch
Shown in the dashboard asInvalid Google Project Number. Your app’s Firebase project and the FCM Service Account uploaded to OneSignal are not the same project.
A project mismatch only causes this status with FID registration on. On the legacy token path, the same mismatch does not fail, and the SDK registers through OneSignal’s shared Firebase project instead. That is why -6 can appear right after you enable FID registration, even though push worked before.
Compare the two projects with Match your Firebase projects. If the values differ, either upload the Service Account from the correct Firebase project, or ship the google-services.json for the project whose Service Account you uploaded.
FAQ
Do I need google-services.json even if I don’t use FID?
Push works without it today, but you should add it. Adding the file does not turn the manifest setting on. See What happens if I skip google-services.json?
Will my existing Subscriptions be lost?
No. Devices re-register on the next app launch and keep the same Subscription, with a new push token value. This applies in both directions, enabling and disabling. The exception is a Firebase project mismatch, which marks existing Subscriptions invalid until you ship a fix. See-6.
Can I enable FID registration for OneSignal only?
No. The setting applies to the whole process and disablesgetToken() for every SDK. Installation ID registration can only use your default FirebaseApp. OneSignal’s shared app cannot produce that ID.
Why did my push token change format?
Your app is now registering with a Firebase Installation ID. Installation IDs are short with no colon, likecXp9fY-TRFCLSy9kVTqorZ. Legacy FCM tokens are longer and contain a colon, like dN8Ya5MTR2OO-0BXdqimCI:APA91bFw....
Related pages
Android Firebase credentials
Upload your FCM Service Account private key and add
google-services.json to your app.Android SDK setup
Install and initialize the OneSignal Android SDK.
Subscriptions
Look up Subscription statuses, including
-6 and the FID statuses -32 to -34.Capture a debug log
Collect verbose SDK logs to see registration errors.